Specifications
Electrical requirements
220V 50/60Hz single phase, 20A, 4300 watt (rotation motor: 300 watts)
Glass material High borosilicate glass 3.3
Evaporating flask
Capacity: 5.28 gallon (20 liters or 0.7 cu ft)
Maximum load: Not to exceed 60% of the flask’s capacity
Sealing flange: 4.9″ diameter
Rotation speed: 10 to 130 rpm
Evaporating speed: 1 gallon/hour (water), 2 gallon/hour (alcohol)
Receiving flask
2.64 gallon (10 liters or 0.35 cu ft)
Condenser Glassware: Main + auxiliary triple-circulating cold traps, vertical
Chilling fluid conneciton: 3/8″ hose barb x 4 (2 on main + 2 on auxiliary)
Condensing surface
Main condenser: 9,480 cm2 or 10.2 sq ft
Auxiliary condenser: 3,580 cm2 or 3.9 sq ft
Working environment
5 to 95°F
Water bath
Temperature range: ambient to 99°C (210°F)
Temperature controller: digital
Dimensions: 17.5″ diameter x 9.8″ depth x 12″ height
Material: stainless steel
Media: distilled water only
Max. water level: not to exceed 1″ from the top rim of the bath
Number of heaters: two
Drain port: one
Exterior liner: rubber
Lifting: motorized
Maximum lifting distance: 7.5 inches
Vacuum
Level: < 3 torrs
Sealing: PTFE + Viton gaskets
Connector: 3/8″ hose barb x 1
Swivel casters Four, built-in with locks
Safety Dry-run, over-temp shut-off, built-in circuit breakers
Shipping weight 238 Lb (evaporator), 130 Lb (glassware)
Unit/shipping dimensions
49 x 23.5 x 82.5″ / 41 x 24 x 48″ (evaporator), 34 x 29 x 33″ (glassware) (WxDxH)
Reviews
There are no reviews yet.