Analytical AP Series

Description

Analytical Balances

Series	W Series
Model	AP225W	AP135W	AP125WD	AP225WD	AP124W	AP224W	AP324W
Capacity	220g	135 g	120 g / 52g	220 g / 102g	120 g	220 g	320 g
Minimum Display	0.01 mg		0.01 mg / 0.1 mg		0.1 mg
Calibration Weight	Built-in ^*1
External Calibration Weight Range for Span Calibration	95 to 220.00090 g （200g）	45 to 135.009 g (100 g)	95 to 120.0090 g (100 g)	95 to 220.009 g (200 g)	45 to 120.009 g (100 g)	95 to 220.009 g (200 g)	95 to 320.009 g (300 g)
Repeatability (Standard deviation)	0.015mg (to 20g) 0.03mg (to 100g) 0.05mg (to Minimum Weight)	0.05 mg	0.1 mg / 0.02 mg	0.1 mg / 0.05 mg	0.1 mg		0.15 mg
Minimum Weight ^*2	20 mg	30 mg			200 mg
Linearity ^*2	±0.1 mg	±0.1 mg	±0.2 mg /±0.05 mg	±0.2 mg /±0.1 mg	±0.2 mg		±0.3 mg
Response Time for race Measurements ^*3	2 sec.
Response Time ^*4	8 sec.		2 sec. / 8 sec.		2 sec.
USB Host (Type A)	Included
USB Device (Type B)	Included
Recipe Compounding	Included
HPLC Buffer Solution Preparation	Included
mol Conversion Function	Included
Sample (Concentration) Preparation	Included
Inspection Support Function	Included
Clock-CAL	Included
Ionizer	Optional
Operating Temperature/Humidity Range	5 to 40°C 20 to 85% ^*5
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Pan Size	ø91 mm
Body Dimensions	Approx. 212(W) x 411(D) x 345(H)mm (power supply unit included)				Approx. 212(W) x 367(D) x 345(H)mm
Weight	Approx. 7.9 kg				Approx. 7.0 kg
Display	OEL display (dot matrix)
Input/Output Terminal	RS-232C (D-sub9P plug) USB host (Type A) USB device (Type B) Ionizer

X Series / Y Series Analytical Balances

Series	W Series			Y Series
Model	AP124X	AP224X	AP324X	AP124Y	AP224Y	AP324Y
Capacity	120 g	220 g	320 g	120 g	220 g	320 g
Minimum Display	0.1 mg
Calibration Weight	Built-in			No
External Calibration Weight Range for Span Calibration	45 to 120.009 g (100 g)	95 to 220.009 g (200 g)	95 to 320.009 g (300 g)	45 to 120.009 g (100 g)	95 to 220.009 g (200 g)	95 to 320.009 g (300 g)
Repeatability (Standard deviation)	0.1 mg		0.15 mg	0.1 mg		0.15 mg
Minimum Weight ^*2	200 mg
Linearity^*2	±0.2 mg		±0.3 mg	±0.2 mg		±0.3 mg
Response Time for race Measurements ^*3	2 sec.
Response Time ^*4	2 sec.
USB Host (Type A)	Not Included
USB Device (Type B)	Included
Recipe Compounding	Not Included
HPLC Buffer Solution Preparation	Not Included
mol Conversion Function	Included			Not Included
Sample (Concentration) Preparation	Not Included
Inspection Support Function	Included			Not Included
Clock-CAL	Included			Not Included
Ionizer	Optional			Not Included
Operating Temperature/Humidity Range	5 to 40°C　20 to 85% ^*5
Sensitivity Stability Against Temperature Range	±2 ppm/°C (10 to 30°C)
Pan Size	Φ91 mm
Body Dimensions	Approx. 212 (W) x 367 (D) x 345 (H) mm
Weight	Approx. 7.0 kg			Approx. 6.5 kg
Display	OEL display (dot matrix)
Input/Output Terminal	RS-232C (D-sub9P plug) USB device (Type B)　Ionizer			RS-232C (D-sub9P plug) USB device (Type B)

*1 Minimum display 0.01mg models provide two internal weights as standard.

*2 Be compliant with USP Chapter 41. This is the tested value by the weight of the balance’s capacity of 5% (or 5 grams’ weight). In the case of the AP225W, the results are for tests carried out with the optional internal windbreak plate applied. The minimum weight value is affected by the installation environment, so it is necessary to measure it in the actual environment of use.

*3 The response time for displaying 90% of the added sample amount value in trace measurements (from 1mg)

*4 The response time value is typical.

*5 Non-condensing.